Privacy Electronics DS-DVR16 Series Instrukcja Użytkownika Pobierz pdf (Strona 62)

DS-7300HI-S User‟s Manual

Figure 8. NTP Settings Menu

4. Check the NTP checkbox to enable feature.

5. Set NTP settings:

• Synchronize Every: Time in minutes to synchronize with NTP server.

• NTP Server: IP address of NTP server.

6. Click OK to save and exit menu.

Note: Time synchronization interval has a range of 0-10080mins, normally 60mins. If the DVR is used on a public

network, you should use a NTP server that has a time synchronization function, such as the server at the National Time

Center (IP Address: 210.72.145.44). If the DVR is setup in a more customized network, NTP software can be used to

establish a NTP server used for time synchronization.

Configuring a Remote Alarm Host

With a remote alarm host set, the DVR will send a signal to the host when an alarm is triggered. The remote alarm host

must have the Network Video Surveillance software installed.

To set up a remote alarm host:

1. Enter Network settings menu by clicking Menu > Setting > Network.

2. Select the Advanced tab.

3. Click the Set button next to Host/Others to enter the Host/Others menu, as shown in Figure 9.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 96 97

Brak uwag

Privacy Electronics DS-DVR16 Series Instrukcja Użytkownika Strona 62