Privacy Electronics DS-DVR08 Series Instrukcja Użytkownika Strona 18
- Strona / 175
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
17
Connecting Required Devices
Before powering up, you should connect cameras and a main monitor to the
unit for basic operation. If needed, connect a call monitor for displaying full
screen video of all installed cameras in sequence.
Connecting Short-term Device
If you plan to install any short-term external devices, such as USB DVD+RW,
USB Hard Disk Drive, etc, to the DVR-4TH/ 8TH/ 16TH series and want to
use them as part of the unit system, make sure those devices are
connected only after the DVR-4TH/ 8TH/ 16TH is powered up. The
DVR-4TH/ 8TH/ 16TH series unit can only recognize the external devices
after the power-up process is completed.
2.4 Rear Panel Connections
There are several connectors on the rear panel of the DVR-4TH/ 8TH/ 16TH
series unit available for installations. The following figure shows the
connectors by name and a detailed description of each connector follows.
There are two differences on the rear panels of different models:
1. The BNC channel connectors are provided according to the supported
number of channels, respectively 4-ch, 8-ch, and 16-ch.
2. The terminal blocks of audio in/out and alarm I/O for DVR-4TH/ 8TH is
smaller whereas the terminal blocks of audio in/out and alarm I/O for
DVR-16TH is larger.
The detail description of each connector is as the followings.
- DVR-4TH/8TH/16TH Series 1
- SPECO TECHNOLOGIES 07/10 1
- Caution and Preventive Tips 3
- Table of Contents 5
- User’s Manual 10
- 1. Overview 14
- 1.1 Product Key Features 15
- 2. System Setup 17
- 3. General System Setup 21
- 3.1.2 Functional Keys 22
- 3.2.1 User Management 26
- 3.5.1 Set Date/ Time 29
- 3.6 IP Camera Setting 31
- 3.6.2 Connection Setup 33
- 3.6.3 Device Setup 34
- 3.6.4 Activated 34
- 3.6.5 Status 34
- 3.7.1 Record Mode Setup 35
- 3.7.2 Schedule Setup 35
- 4. Basic Operation 38
- 4.1.2 Digital Zoom 39
- 4.2 Sequence Setup 41
- 4.3.1 Searching by Time 42
- 4.3.2 Calendar Search 43
- 4.3.3 Smart Search 44
- 4.3.4 Searching by Event 45
- 4.3.5 Search by Text 46
- 4.4 Video Export 47
- 4.4.1.3 Digital Signature 49
- 4.4.1.4 Erase Disc 50
- 4.6 Dome Control 53
- 4.6.3 RS485 Setup 54
- 4.9 UPnP Function 59
- 4.10 Boot Log Exportation 60
- 5.1 System Setup 63
- 5.1.2 Language 65
- 5.1.3 Date / Time 65
- 5.1.3.2 Time Zone 66
- 5.1.3.4 Date Display Mode 66
- 5.1.3.5 Time Display Mode 67
- 5.1.4 Unit Name 68
- 5.1.5 Show Unit Name 68
- 5.1.6 User Management 69
- 5.1.7 Network Setup 70
- 5.1.7.1 LAN Select 71
- 5.1.7.2 LAN Setup 71
- Network restart…………………….….√ 74
- DDNS submitted………………………√ 74
- WAN connection………………………√ 74
- 5.1.7.3 Modem Setup 75
- 5.1.7.4 Trigger Port 80
- 5.1.7.5 Email Address 81
- 5.1.7.6 SMTP Setup 81
- 5.1.7.7 DDNS Setup 83
- 5.1.8 RS485 Setup 85
- 5.1.8.2 Baud Rate 86
- 5.1.8.3 Bits 86
- 5.1.8.4 Stop 86
- 5.1.8.5 Parity 86
- 5.1.9.1 Audio Output 86
- 5.1.11 IP Camera Support 87
- 5.2 Monitor Setup 88
- 5.2.3 Monitor Brightness 89
- 5.2.4 Monitor Contrast 89
- 5.2.5 Monitor Chrominance 89
- 5.2.6 VGA Resolution 89
- 5.2.7 VGA Frequency 90
- 5.2.8 Show Color Bar 90
- 5.3 Camera Setup 91
- 5.3.1.4 Camera Title 92
- 5.3.1.6 Termination 93
- 5.3.1.7 Brightness 93
- 5.3.1.8 Contrast 93
- 5.3.2 IP Camera 94
- 5.3.2.2 IP Camera Title 95
- 5.3.2.3 Search Via UPnP 95
- 5.3.2.4 Hostname/IP 95
- 5.3.2.5 Model 96
- 5.3.2.6 Connection Setup 96
- 5.3.2.7 Device Setup 97
- Re-collecting data 98
- Please wait! 98
- Cannot set the IP device 98
- 5.3.2.8 Activated 99
- 5.3.2.9 Status 99
- 5.3.2.10 Copy Settings 99
- 5.4 Record Setup 100
- 5.4.2 Schedule Setup 101
- User’s Manual 102
- 5.4.5 ezRecord Setup 104
- 5.4.6 Data Lifetime Setup 105
- 5.4.8 Circular Recording 106
- 5.4.9 Audio Recording 106
- 5.4.7 Pre-Alarm Recording 106
- 5.4.10 Purge Data 107
- 5.5 Sequence Setup 108
- 5.6 Event Setup 109
- 5.6.4 Email Attachment 110
- 5.6.6 Event Full Screen 111
- 5.6.7 Event Duration 111
- 5.6.8 Per Channel Config 111
- 5.6.8.1 Channel Select 112
- 5.6.8.2 Video Loss Detect 112
- 5.6.8.3 Motion Detect 112
- 5.6.8.4 Detection Config 112
- 5.6.8.5 Alarm In 113
- 5.6.8.6 Alarm Out 113
- 5.7 Database Setup 116
- 5.8 Configuration 118
- 5.8.2 Import Configuration 119
- 5.8.3 Export Configuration 119
- 5.8.4 Import Deterrent 120
- 5.9 Video Export 121
- 5.9.1 Select Device 122
- 5.9.2 Select Channel 123
- 5.9.3 From / To Time 123
- 5.9.4 Select Events 123
- 5.9.5 Data Type 123
- 5.9.6 Export Format 124
- 5.9.7 Digital Signature 124
- 5.9.8 Erase Disc 124
- 5.9.9 Begin Export 124
- 5.10.1 POS Function 125
- 5.10.2 POS Overlay 125
- 5.10.3 Exception POS Setup 126
- 5.10.4 Input Setup 127
- 5.10.4.1 Port Selection 128
- 5.10.4.2 Input source 128
- 5.10.4.3 Camera Selection 128
- 5.10.4.4 Text Filter 128
- Manual Filter Setup 129
- Header 1 129
- Header 2 129
- 5.11 Shutdown 130
- 6.2 Software Installation 132
- 6.2.2.1 Login / Logout 135
- 6.3.1 View Live Video 136
- 6.3.2 Instant Recording 138
- 6.3.3 Playback Video 139
- 6.3.3.3 Playback Controls 140
- 6.3.6 Take a Snapshot 141
- Function 4CH 8CH 16CH 144
- Appendix C: Record Duration 148
- Using EXT2IFS on Your PC 164
- Start Playing the *.drv file 166
- *drv file into your PC 167
- Appendix H: IR Remote 168
- Special Operations 170
Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) Privacy Electronics DS-DVR08 Series
(21 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji